
Diamond Mesh Lath
We carry a wide assortment of galvanized Stucco lath. In stock we keep 2.5 flat and self furred with and without paper backing. We also carry 3.4 self furred with and without paper backing. In stock we also keep both high ripped and low ripped for plastering ceilings.
We carry a wide assortment of galvanized Stucco lath. In stock we keep 2.5 flat and self furred with and without paper backing. We also carry 3.4 self furred with and without paper backing. In stock we also keep both high ripped and low ripped for plastering ceilings.

Double "V" Expansion Control Joint
Used to provide mechanism for movement to accommodate expansion and contraction
caused by initial stucco shrinkage and minor thermal movement.
Comes in sizes: 3/8",1/2", 5/8", 3/4" and 7/8"
Used to provide mechanism for movement to accommodate expansion and contraction
caused by initial stucco shrinkage and minor thermal movement.
Comes in sizes: 3/8",1/2", 5/8", 3/4" and 7/8"

No. 66 Casing Bead
Used to effectively terminate plaster edge and/or to separate stucco from all other structural membranes at doors, windows and other openings; also when plaster/stucco meets dissimilar material. Expanded flange provides excellent stucco embedment at the junctions of the bead and metal lath.
Comes in sizes: 3/8",1/2", 5/8", 3/4", 7/8", 1", 1 1/4" and 1 1/2"
Used to effectively terminate plaster edge and/or to separate stucco from all other structural membranes at doors, windows and other openings; also when plaster/stucco meets dissimilar material. Expanded flange provides excellent stucco embedment at the junctions of the bead and metal lath.
Comes in sizes: 3/8",1/2", 5/8", 3/4", 7/8", 1", 1 1/4" and 1 1/2"

X-1 Corner Bead
Wing size 2-5/8" x 2-5/8". Used to reinforce external corners in Portland cement stucco applications. The 2-5/8" expanded flanges allow for complete embedment of the entire bead, especially near the nose where strength is needed most. Available in hot-dipped galvanized and 99% pure zinc alloy.
Wing size 2-5/8" x 2-5/8". Used to reinforce external corners in Portland cement stucco applications. The 2-5/8" expanded flanges allow for complete embedment of the entire bead, especially near the nose where strength is needed most. Available in hot-dipped galvanized and 99% pure zinc alloy.

X-2 Corner Bead
Wider, reinforced flange provides additional rigidity and strength superior to the X-1 corner bead, thus allowing for easier installation.
Wider, reinforced flange provides additional rigidity and strength superior to the X-1 corner bead, thus allowing for easier installation.

Foundation Weep Screed
Used to provide a weep mechanism as part of the drainage system as required at the bottom of all framed walls; by all major building codes and the International Building Code in ASTM C1063. The larger holes in the ground flange are drainage holes as the entire surface of the sloped ground provides for drainage once the stucco has hydrated and shrinkage has occurred. The 3-1/2" nailing flange serves as a flashing when water resistant, breathable building paper or paper backed lath is installed over the flange.
Used to provide a weep mechanism as part of the drainage system as required at the bottom of all framed walls; by all major building codes and the International Building Code in ASTM C1063. The larger holes in the ground flange are drainage holes as the entire surface of the sloped ground provides for drainage once the stucco has hydrated and shrinkage has occurred. The 3-1/2" nailing flange serves as a flashing when water resistant, breathable building paper or paper backed lath is installed over the flange.

Williams Brothers Access Panels
WB GP 100 precision-flush 14 gauge general purpose access door for wall and ceiling installation. The WB GP 100 general purpose access panel is considered the best general purpose access door on the market. Specified by architects word wide, this general purpose access panel far surpasses other doors because its surround trim is welded on all four sides to the return frame providing strength and rigidity. With a frame that is laser cut from one sheet of cold rolled steel and no corner mitering, this door is aesthetically preferred by architects and building professionals alike.
Stocked sizes: 8"x8", 10"x10", 12"x12", 14"x14", 16"x16", 18"x18", 20"x20", 22"x22" and 24"x24"
Other sizes available upon special order.
WB GP 100 precision-flush 14 gauge general purpose access door for wall and ceiling installation. The WB GP 100 general purpose access panel is considered the best general purpose access door on the market. Specified by architects word wide, this general purpose access panel far surpasses other doors because its surround trim is welded on all four sides to the return frame providing strength and rigidity. With a frame that is laser cut from one sheet of cold rolled steel and no corner mitering, this door is aesthetically preferred by architects and building professionals alike.
Stocked sizes: 8"x8", 10"x10", 12"x12", 14"x14", 16"x16", 18"x18", 20"x20", 22"x22" and 24"x24"
Other sizes available upon special order.

Studs Unlimited
Galvanized, light-gauge steel framing products for the residential and commercial construction industry.
Galvanized, light-gauge steel framing products for the residential and commercial construction industry.

Truss Mesh
Not a restock item. We have this in various sizes. Call or email us today for details and pricing.
Not a restock item. We have this in various sizes. Call or email us today for details and pricing.